Artificial Membranes Research Articles

Ion and Molecular Sieving with Ultrathin Polydopamine Nanomembranes.

In contrast to biological cell membranes, it is still a major challenge for synthetic membranes to efficiently separate ions and small molecules, due to their similar sizes in the sub-nanometer range. Inspired by biological ion channels with their unique channel wall chemistry that facilitates ion sieving by ion-channel interactions, we report here the first free-standing, ultrathin (10-17nm) nanomembranes composed entirely of polydopamine (PDA) as ion and molecular sieves. These nanomembranes are obtained via an easily scalable electropolymerization strategy and provide nanochannels with various amine and phenolic hydroxyl groups that offer a favorable chemical environment for ion-channel electrostatic and hydrogen bond interactions. They exhibit remarkable selectivity for monovalent ions over multivalent ions and larger species with K+/Mg2+ of ≈4.2, K+/[Fe(CN)6]3- of ≈10.3, and K+/Rhodamine B of ≈273.0 in a pressure-driven process, as well as cyclic reversible pH-responsive gating properties. Infrared spectra reveal hydrogen bond formation between hydrated multivalent ions and PDA, which prevents the transport of multivalent ions and facilitates high selectivity. We propose chemically rich, free-standing, and pH-responsive PDA nanomembranes with specific interaction sites as customizable high-performance sieves for a wide range of challenging separation requirements. This article is protected by copyright. All rights reserved.

The Fate of RPE Cells Following hESC-RPE Patch Transplantation in Haemorrhagic Wet AMD: Pigmentation, Extension of Pigmentation, Thickness of Transplant, Assessment for Proliferation and Visual Function—A 5 Year—Follow Up

(1) Background: We reviewed a stem cell-derived therapeutic strategy for advanced neovascular age-related macular degeneration (nAMD) using a human embryonic stem cell-derived retinal pigment epithelium (hESC-RPE) monolayer delivered on a coated, synthetic basement membrane (BM)—the patch—and assessed the presence and distribution of hESC-RPE over 5 years following transplantation, as well as functional outcomes. (2) Methods: Two subjects with acute vision loss due to sub-macular haemorrhage in advanced nAMD received the hESC-RPE patch. Systematic immunosuppression was used peri-operatively followed by local depot immunosuppression. The subjects were monitored for five years with observation of RPE patch pigmentation, extension beyond the patch boundary into surrounding retina, thickness of hESC-RPE and synthetic BM and review for migration and proliferation of hESC-RPE. Visual function was also assessed. (3) Results: The two study participants showed clear RPE characteristics of the patch, preservation of some retinal ultrastructure with signs of remodelling, fibrosis and thinning on optical coherence tomography over the 5-year period. For both participants, there was evidence of pigment extension beyond the patch continuing until 12 months post-operatively, which stabilised and was preserved until 5 years post-operatively. Measurement of hESC-RPE and BM thickness over time for both cases were consistent with predefined histological measurements of these two layers. There was no evidence of distant RPE migration or proliferation in either case beyond the monolayer. Sustained visual acuity improvement was apparent for 2 years in both subjects, with one subject maintaining the improvement for 5 years. Both subjects demonstrated initial improvement in fixation and microperimetry compared to baseline, at year 1, although only one maintained this at 4 years post-intervention. (4) Conclusions: hESC-RPE patches show evidence of continued pigmentation, with extension, to cover bare host basement membrane for up to 5 years post-implantation. There is evidence that this represents functional RPE on the patch and at the patch border where host RPE is absent. The measurements for thickness of hESC-RPE and BM suggest persistence of both layers at 5 years. No safety concerns were raised for the hypothetical risk of RPE migration, proliferation or tumour formation. Visual function also showed sustained improvement for 2 years in one subject and 5 years in the other subject.

Modeling of nanochannels in synthetic membranes

Modeling of nanochannels in synthetic membranes

Microfluidic Electroporation Arrays for Investigating Electroporation-Induced Cellular Rupture Dynamics

Electroporation is pivotal in bioelectrochemistry for cellular manipulation, with prominent applications in drug delivery and cell membrane studies. A comprehensive understanding of pore generation requires an in-depth analysis of the critical pore size and the corresponding energy barrier at the onset of cell rupture. However, many studies have been limited to basic models such as artificial membranes or theoretical simulations. Challenging this paradigm, our study pioneers using a microfluidic electroporation chip array. This tool subjects live breast cancer cell species to a diverse spectrum of alternating current electric field conditions, driving electroporation-induced cell rupture. We conclusively determined the rupture voltages across varying applied voltage loading rates, enabling an unprecedented characterization of electric cell rupture dynamics encompassing critical pore radius and energy barrier. Further bolstering our investigation, we probed cells subjected to cholesterol depletion via methyl-β-cyclodextrin and revealed a strong correlation with electroporation. This work not only elucidates the dynamics of electric rupture in live cell membranes but also sets a robust foundation for future explorations into the mechanisms and energetics of live cell electroporation.

Oral misoprostol alone, compared with oral misoprostol followed by oxytocin, in women induced for hypertension of pregnancy: A multicentre randomised trial.

To assess whether, in those requiring continuing uterine stimulation after cervical ripening with oral misoprostol and membrane rupture, augmentation with low-dose oral misoprostol is superior to intravenous oxytocin. Open-label, superiority randomised trial. Government hospitals in India. Women who were induced for hypertensive disease in pregnancy and had undergone cervical ripening with oral misoprostol, but required continuing stimulation after artificial membrane rupture. Participants received misoprostol (25 micrograms, orally, 2-hourly) or titrated oxytocin through an infusion pump. All women had one-to-one care; fetal monitoring was conducted using a mixture of intermittent and continuous electronic fetal monitoring. Caesarean birth. A total of 520 women were randomised and the baseline characteristics were comparable between the groups. The caesarean section rate was not reduced with the use of misoprostol (misoprostol, 84/260, 32.3%, vs oxytocin, 71/260, 27.3%; aOR 1.23; 95% CI 0.81-1.85; P = 0.33). The interval from randomisation to birth was somewhat longer with misoprostol (225 min, 207-244 min, vs 194 min, 179-210 min; aOR 1.137; 95% CI 1.023-1.264; P = 0.017). There were no cases of hyperstimulation in either arm. The rates of fetal heart rate abnormalities and maternal side effects were similar. Fewer babies in the misoprostol arm were admitted to the special care unit (10 vs 21 in the oxytocin group; aOR 0.463; 95% CI 0.203-1.058; P = 0.068) and there were no neonatal deaths in the misoprostol group, compared with three neonatal deaths in the oxytocin arm. Women's acceptability ratings were high in both study groups. Following cervical preparation with oral misoprostol and membrane rupture, the use of continuing oral misoprostol for augmentation did not significantly reduce caesarean rates, compared with the use of oxytocin. There were no hyperstimulation or significant adverse events in either arm of the trial.

Localized surface plasmon resonance and atomic force microscopy study of model lipid membranes and their interactions with amyloid and melatonin

Alzheimer's disease (AD) is a progressive neurodegenerative disorder characterized by the accumulation of amyloid plaques in the brain. The toxicity of amyloid to neuronal cell surfaces arises from interactions between small intermediate aggregates, namely amyloid oligomers, and the cell membrane. The nature of these interactions changes with age and disease progression. In our previous work, we demonstrated that both membrane composition and nanoscale structure play crucial roles in amyloid toxicity, and that membrane models mimicking healthy neuron were less affected by amyloid than model membranes mimicking AD neuronal membranes. This understanding introduces the possibility of modifying membrane properties with membrane-active molecules, such as melatonin, to protect them from amyloid-induced damage. In this study, we employed atomic force microscopy and localized surface plasmon resonance to investigate the protective effects of melatonin. We utilized synthetic lipid membranes that mimic the neuronal cellular membrane at various stages of AD and explored their interactions with amyloid-β (1–42) in the presence of melatonin. Our findings reveal that the early diseased membrane model is particularly vulnerable to amyloid binding and subsequent damage. However, melatonin exerts its most potent protective effect on this early-stage membrane. These results suggest that melatonin could act at the membrane level to alleviate amyloid toxicity, offering the most protection during the initial stages of AD.

Carbomer Hydrogels with Microencapsulated α-Tocopherol: Focus on the Biocompatibility of the Microcapsules, Topical Application Attributes, and In Vitro Release Study

The microencapsulation of α-tocopherol based on the complex coacervation of low-molecular-weight chitosan (LMWC) and sodium lauryl ether sulphate (SLES) without harmful crosslinkers can provide biocompatible carriers that protect it from photodegradation and air oxidation. In this study, the influence of the microcapsule wall composition on carrier performance, compatibility with a high-water-content vehicle for topical application, and release of α-tocopherol were investigated. Although the absence of aldehyde crosslinkers decreased the encapsulation efficiency of α-tocopherol (~70%), the variation in the LMWC/SLES mass ratio (2:1 or 1:1) had no significant effect on the moisture content and microcapsule size. The prepared microcapsule-loaded carbomer hydrogels were soft semisolids with pseudoplastic flow behavior. The integrity of microcapsules embedded in the hydrogel was confirmed by light microscopy. The microcapsules reduced the pH, apparent viscosity, and hysteresis area of the hydrogels, while increasing their spreading ability on a flat inert surface and dispersion rate in artificial sweat. The in vitro release of α-tocopherol from crosslinker-free microcapsule-loaded hydrogels was diffusion-controlled. The release profile was influenced by the LMWC/SLES mass ratio, apparent viscosity, type of synthetic membrane, and acceptor medium composition. Better data quality for the model-independent analysis was achieved when a cellulose nitrate membrane and ethyl alcohol 60% w/w as acceptor medium were used.

Reversed-phase thin-layer chromatography and ultra-performance liquid chromatography/mass spectrometry to estimate the drug likeness of phosphodiesterase 10A inhibitors with phthalimide core

AbstractLipophilicity is a physicochemical parameter well known as a decisive factor for predicting the successful development of a drug. Thus, a balance between potency and physicochemical properties during medicinal chemistry optimization is needed. In this study, the lipophilicity of isoindole-1,3(2H)-dione derivatives designed as phosphodiesterase 10A (PDE10A) inhibitors was determined by chromatographic [reversed-phase thin-layer chromatography (RP-TLC) and ultra-performance liquid chromatography/mass spectrometry (UPLC/MS)] and in silico methods. To assess the correlation between the obtained lipophilicity parameters, principal component analysis (PCA) was performed. logP values obtained by chromatographic (logPRP-TLC and logPUPLC/MS) and in silico methods were compared using the PCA method. The results of PCA revealed that logPUPLC/MS and in silico clogP provided by the ChemDraw program were highly correlated. Compounds’ drug likeness was screened, and the pharmacokinetic properties were predicted. All the investigated compounds displayed drug-likeness properties, and they met the criteria of Lipinski’s rule of five, which predicted the oral bioavailability of drug candidates. Analysis of the influence of physicochemical properties on the biological activity showed that the compounds with increased potency on PDE10A had significantly higher topological polar surface area (TPSA) values. The blood‒brain barrier permeability and the hemolytic activity of model compound 18 were examined. The model compound 18 displayed no toxicity effect on erythrocytes in the hemolytic assay and good parallel artificial membrane permeability. The results showed that phthalimide compounds with benzimidazole moiety are a source of compound-targeted inhibition of PDE10A with balanced physicochemical and drug-likeness properties.

Reaction, Recognition, Relay: Anhydride Hydrolysis Reported by Conformationally Responsive Fluorinated Foldamers in Micelles.

Natural membrane receptors are proteins that can report on changes in the concentration of external chemical messengers. Messenger binding to a receptor produces conformational changes that are relayed through the membrane into the cell; this information allows cells to adapt to changes in their environment. Artificial membrane receptors (R)-1 and (S)-1 are helical α-aminoisobutyric acid (Aib) foldamers that replicate key parts of this information relay. Solution-phase 19F NMR spectroscopy of zinc(II)-capped receptor 1, either in organic solvent or in membrane-mimetic micelles, showed messenger binding produced an enrichment of either left- or right-handed screw-sense; the chirality of the bound messenger was relayed to the other receptor terminus. Furthermore, in situ production of a chemical messenger in the external aqueous environment could be detected in real-time by a racemic mixture of receptor 1 in micelles. The hydrolysis of insoluble anhydrides produced carboxylate in the aqueous phase, which bound to the receptors and gave a distinct 19F NMR output from inside the hydrophobic region of the micelles.

Reaction, Recognition, Relay: Anhydride Hydrolysis Reported by Conformationally Responsive Fluorinated Foldamers in Micelles

Natural membrane receptors are proteins that can report on changes in the concentration of external chemical messengers. Messenger binding to a receptor produces conformational changes that are relayed through the membrane into the cell; this information allows cells to adapt to changes in their environment. Artificial membrane receptors (R)‐1 and (S)‐1 are helical α‐aminoisobutyric acid (Aib) foldamers that replicate key parts of this information relay. Solution‐phase 19F NMR spectroscopy of zinc(II)‐capped receptor 1, either in organic solvent or in membrane‐mimetic micelles, showed messenger binding produced an enrichment of either left‐ or right‐handed screw‐sense; the chirality of the bound messenger was relayed to the other receptor terminus. Furthermore, in situ production of a chemical messenger in the external aqueous environment could be detected in real‐time by a racemic mixture of receptor 1 in micelles. The hydrolysis of insoluble anhydrides produced carboxylate in the aqueous phase, which bound to the receptors and gave a distinct 19F NMR output from inside the hydrophobic region of the micelles.

Fluorescence lifetime imaging microscopy of flexible and rigid dyes probes the biophysical properties of synthetic and biological membranes

Sensing of the biophysical properties of membranes using molecular reporters has recently regained widespread attention. This was elicited by the development of new probes of exquisite optical properties and increased performance, combined with developments in fluorescence detection. Here, we report on fluorescence lifetime imaging of various rigid and flexible fluorescent dyes to probe the biophysical properties of synthetic and biological membranes at steady state as well as upon the action of external membrane-modifying agents. We tested the solvatochromic dyes Nile red and 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine-N-(7-nitro-2-1,3-benzoxadiazol-4-yl) (ammonium salt), the viscosity sensor Bodipy C12, the flipper dye FliptR, as well as the dyes 3,3′-dioctadecyloxacarbocyanine perchlorate, Bodipy C16, lissamine-rhodamine, and Atto647, which are dyes with no previous reported environmental sensitivity. The performance of the fluorescent probes, many of which are commercially available, was benchmarked with the well-known environmental reporters, with Nile red and Bodipy C12 being specific reporters of medium hydration and viscosity, respectively. We show that some widely used ordinary dyes with no previous report of sensing capabilities can exhibit competing performance compared to highly sensitive commercially available or custom-based solvatochromic dyes, molecular rotors, or flipper in a wide range of biophysics experiments. Compared to other methods, fluorescence lifetime imaging is a minimally invasive and nondestructive method with optical resolution. It enables biophysical mapping at steady state or assessment of the changes induced by membrane-active molecules at subcellular level in both synthetic and biological membranes when intensity measurements fail to do so. The results have important consequences for the specific choice of the sensor and take into consideration factors such as probe sensitivity, response to environmental changes, ease and speed of data analysis, and the probe’s intracellular distribution, as well as potential side effects induced by labeling and imaging.

[Evaluation of Solubility and Membrane Permeability of Middle-Molecule Compounds Using Artificial Membranes and Living Cells].

In contrast to small molecules, middle molecules present a promising therapeutic modality owing to their elevated specificity, minimal adverse effects, capacity to target protein-protein interactions, and, unlike antibody-based drugs, their suitability for oral administration and intracellular target engagement. Post-oral administration, the paramount considerations encompass solubility and membrane permeability during the initial phase until the drug attains systemic circulation. Furthermore, penetration of the cell membrane is essential to accessing intracellular targets. We evaluated the solubility and membrane permeability of 965 compounds sourced from middle molecule libraries affiliated with Hokkaido University, Kitasato University, and the University of Tokyo. To gauge membrane permeability, we employed both the parallel artificial membrane permeability assay (PAMPA) and Caco-2 cell monolayers. Notably, while membrane permeability in Caco-2 cells exhibited an approximate threefold increase in comparison to PAMPA measurements, certain compounds demonstrated permeability levels less than one-third of those observed in Caco-2 cells. Recognizing the potential involvement of efflux transporters expressed in Caco-2 cells in these variations, we conducted additional assessments involving directional transport in the presence of a transporter inhibitor. Our findings suggest that nearly 80% of these compounds serve as substrates for efflux transporters. Considering the relevance of intracellular targets, we shifted our focus from membrane permeation to intracellular uptake, conducting simulations tailored to assess cellular uptake.

Enhanced bioavailability of curcumin amorphous nanocomposite prepared by a green process using modified starch

Curcumin (Cur), a bioactive compound extracted from plants, has attracted widespread attention due to its multiple pharmacological activities. However, the low bioavailability due to the inherent limitations in water solubility, chemical stability, and permeability poses great challenges for realizing its clinical potentials. In the current study, octenyl succinic anhydride-modified starch (OSAS), a renewable and biodegradable biopolymer, was employed to fabricate Cur amorphous composite nanoparticles (Cur/OSA-S NPs) through a solvent-free pH-driven method with the aim to enhance Cur's bioavailability by improving its solubility and stability. Cur/OSA-S NPs, with mean sizes of about 128.9 ± 8.6 nm, encapsulation efficiencies of about 90.0 %, and the drug loading capacities around 51.0 ± 0.2 %, were successfully prepared. Cur was found to be dispersed within the composite nanoparticles in amorphous state as confirmed by the XRD and DSC characterizations. In addition, Cur/OSA-S NPs offers excellent storage, thermal and light stability, excellent re-dispersibility, and approximately 92 times better solubility than the original Cur. Furthermore, studies of dissolution and the parallel artificial membrane permeability assay (PAMPA) confirmed enhanced dissolution rates and in vitro permeabilities of Cur/OSA-S NPs. Cancer cell viability and uptake experiments revealed that Cur/OSA-S NPs possessed more potent inhibitory effects on cancer cell proliferation compared to the raw Cur. The results obtained from the current study demonstrated the effectiveness of OSA-S for manufacturing Cur amorphous composite nanoparticles with enhanced solubility, stability, and permeability, which might be valuable for further development of Cur based products for treatment of various diseases.

Construction of discrimination models of cationic drugs for phospholipidosis induction potential by using interaction data with immobilized artificial membrane as well as physicochemical properties.

Accurate prediction of the phospholipidosis–induction risk of drugs at early stages is important in drug development. So far, discrimination models for predicting the induction risk of cationic drugs have been proposed, but it is still challenging to accurately predict the risk of cationic drugs with intermediate hydrophobicity (logP). In this study, we introduced a parameter (Δlogk40) reflecting not only hydrophobic interaction but also interactions with the polar headgroup between cationic drugs and phospholipids, obtained with liquid chromatography using an immobilized artificial membrane column. The parameter was used along with other physicochemical properties as features to construct discrimination models. Linear discriminant analysis, the modified Mahalanobis discriminant analysis, support vector machine, and random forest were employed for model construction. The results showed that all discrimination models exhibited good predictive performance, with the modified Mahalanobis discriminant analysis and random forest providing the best results for cationic drugs, suggesting that the usefulness of the parameter reflecting complex interactions between cationic drugs and immobilized artificial membrane for constructing discrimination models to predict the induction risk. Furthermore, by applying the parameter as a feature in constructing discrimination models, we demonstrated an improvement in the predictive performance for drugs with intermediate hydrophobicity.

Comparison of in vitro membrane permeabilities of diverse environmental chemicals with in silico predictions

The parallel artificial membrane permeability assay (PAMPA) is widely used for estimating biomembrane permeabilities of experimental drugs in pharmaceutical research. However, there are few reports of studies using PAMPA to measure membrane permeabilities of chemicals of environmental concern (CECs) outside the pharmaceutical domain, many of which differ substantially from drugs in their physicochemical properties. We applied PAMPA methods simulating gastrointestinal (PAMPA-GIT) and blood-brain barrier (PAMPA-BBB) membranes under consistent conditions to 51 CECs, including some pharmaceuticals. A backward stepwise multivariate linear regression was implemented to explore the correlation between the differences of measured permeabilities from PAMPA-GIT and PAMPA-BBB and Abraham solute descriptors. In addition, a previously reported in silico model was evaluated by comparing predicted and measured permeability results. PAMPA-GIT and PAMPA-BBB experimental permeability results agreed relatively well. The backward stepwise multivariate linear regression identified excess molar refraction and polarizability to be significant at the 0.10 level in predicting the differences between PAMPA-GIT and PAMPA-BBB. The in silico model performed well – with predicted permeability of most compounds within two-fold of experimentally measured values. We found that CECs pose experimental challenges to the PAMPA method in terms of having lower solubility and lower stability compared to most drugs.

The Effects of the Coating and Aging of Biodegradable Polylactic Acid Membranes on In Vitro Primary Human Retinal Pigment Epithelium Cells

Age-related macular degeneration (AMD) is the most frequent cause of blindness in developed countries. The replacement of dysfunctional human retinal pigment epithelium (hRPE) cells by the transplantation of in vitro-cultivated hRPE cells to the affected area emerges as a feasible strategy for regenerative therapy. Synthetic biomimetic membranes arise as powerful hRPE cell carriers, but as biodegradability is a requirement, it also poses a challenge due to its limited durability. hRPE cells exhibit several characteristics that putatively respond to the type of membrane carrier, and they can be used as biomarkers to evaluate and further optimize such membranes. Here, we analyze the pigmentation, transepithelial resistance, genome integrity, and maturation markers of hRPE cells plated on commercial polycarbonate (PC) versus in-house electrospun polylactide-based (PLA) membranes, both enabling separate apical/basolateral compartments. Our results show that PLA is superior to PC-based membranes for the cultivation of hRPEs, and the BEST1/RPE65 maturation markers emerge as the best biomarkers for addressing the quality of hRPE cultivated in vitro. The stability of the cultures was observed to be affected by PLA aging, which is an effect that could be partially palliated by the coating of the PLA membranes.

Synthesis and Neuroprotective Evaluation of Substituted Indanone/Benzofuranone and Piperidine Hybrids.

Based on the neuroprotection of butylphthalide and donepezil, a series of indanone/benzofuranone and piperidine hybrids were designed and synthesized for assessment of their neuroprotective activities, aiming to enhance the bioavailability and therapeutic efficacy of natural phthalide analogues. Within this study, it was observed that most indanone derivatives bearing 1-methylpiperidine in the tail segment demonstrated superior neuroprotective effects on the oxygen glucose deprivation/reperfusion (OGD/R)-induced rat primary neuronal cell injury model in vitro compared to benzofuranone compounds. Among the synthesized compounds, 11 (4, 14, 15, 22, 26, 35, 36, 37, 48, 49, and 52) displayed robust cell viabilities in the OGD/R model, along with favorable blood-brain barrier permeability as confirmed by the parallel artificial membrane permeability assay. Notably, compound 4 showed significant neuronal cell viabilities within the concentration range of 3.125 to 100 μM, without inducing cytotoxicity. Further results from in vivo middle cerebral artery occlusion/R experiments revealed that 4 effectively ameliorated ischemia-reperfusion injury, reducing the infarct volume to 18.45% at a dose of 40 mg/kg. This outcome suggested a superior neuroprotective effect compared to edaravone at 20 mg/kg, further highlighting the potential therapeutic efficacy of compound 4 in addressing neurological disorders.

Improved transdermal delivery of novel cannabinoid-loaded patches using Eudragit matrix

The main active cannabinoids in extracts of Cannabis sativa L., cannabidiolic acid (CBDA) and tetrahydrocannabinolic acid (THCA), are known for their pharmacological effects, including anti-inflammatory, analgesic, psychedelic, anti-cancer, and anti-spasmodic activities. This study aimed to develop adhesive cannabinoid-loaded transdermal patches (CLTPs) to enhance the skin permeation of the active cannabinoids, CBDA and THCA, and evaluate their stability. Optimized CLTPs were prepared in 1.5 % (w/w) polyvinyl alcohol-coated petri dishes using a solvent casting technique. The casting solution consisted of mixtures of isopropyl alcohol and ethanol, along with Eudragit®E100, succinic acid, dibutyl phthalate, and permeation enhancers such as oleic acid, isopropyl myristate, mixtures of oleic acid and isopropyl myristate, ethoxydiglycol, sesame oil, and co-polymer (Kollidon®VA64). The physicochemical properties of the patches were characterized by uniformity, thickness, drug content, swelling, and mechanical properties. The in vitro release studies of CBDA and THCA through a synthetic hydrophobic membrane using various release enhancers from these patches were conducted using Franz diffusion cells. Using ethoxydiglycol as a release enhancer demonstrated the highest release profile for both cannabinoids. The steady-state flux values of CBDA and THCA were 3.83 ± 0.45 μg/cm2/h (1.85-fold compared to the control) and 0.72 ± 0.14 μg/cm2/h (1.54-fold compared to the control) at 8 h. The stability studies of CLTPs demonstrated that both remained stable at 4 °C for at least 90 days. In conclusion, transdermal patches containing cannabinoids have been successfully developed and characterized. These findings offer a promising avenue for further investigation of CLTPs, as they could serve as a versatile formulation strategy for pharmaceutical products.

Micro-Computed Tomography Analysis of Peri-Implant Bone Defects Exposed to a Peri-Implantitis Microcosm, with and without Bone Substitute, in a Rabbit Model: A Pilot Study.

Peri-implantitis is an inflammatory condition characterized by inflammation in the peri-implant connective tissue and a progressive loss of supporting bone; it is commonly associated with the presence of biofilms on the surface of the implant, which is an important factor in the development and progression of the disease. The objective of this study was to evaluate, using micro-CT, the bone regeneration of surgically created peri-implant defects exposed to a microcosm of peri-implantitis. Twenty-three adult New Zealand white rabbits were included in the study. Bone defects of 7 mm diameter were created in both tibiae, and a cap-shaped titanium device was placed in the center, counter-implanted with a peri-implantitis microcosm. The bone defects received a bone substitute and/or a resorbable synthetic PLGA membrane, according to random distribution. Euthanasia was performed 15 and 30 days postoperatively. Micro-CT was performed on all samples to quantify bone regeneration parameters. Bone regeneration of critical defects occurred in all experimental groups, with a significantly greater increase in cases that received bone graft treatment (p < 0.0001), in all measured parameters, at 15 and 30 days. No significant differences were observed in the different bone neoformation parameters between the groups that did not receive bone grafts (p > 0.05). In this experimental model, the presence of peri-implantitis microcosms was not a determining factor in the bone volume parameter, both in the groups that received regenerative treatment and in those that did not.

Application of parallel artificial membrane permeability assay technique and chemometric modeling for blood-brain barrier permeability prediction of protein kinase inhibitors.

Aim: This study aims to investigate the passive diffusion of protein kinase inhibitors through the blood-brain barrier (BBB) and to develop a model for their permeability prediction. Materials & methods: We used the parallel artificial membrane permeability assay to obtain logPe values of each of 34 compounds and calculated descriptors for these structures to perform quantitative structure-property relationship modeling, creating different regression models. Results: The logPe values have been calculated for all 34 compounds. Support vector machine regression was considered the most reliable, and CATS2D_09_DA, CATS2D_04_AA, B04[N-S]and F07[C-N] descriptors were identified as the most influential to passive BBB permeability. Conclusion: The quantitative structure-property relationship-support vector machine regression model that has been generated can serve as an efficient method for preliminary screening of BBB permeability of new analogs.